Oldenuf
New Member
On the EK chain before it was changed out I noted that the slack, in some areas was 50mm and in others just over 30mm. Reasoned this was because of the inferior chain that Honda was recalling, and this was with only 300 miles of use. So the new chain, the DID is also breaking in with this same uneven measures. I'm measuring 35mm in some places in the chain and 50mm in others. I guess it could be sprocket related but in either case, take care and not adjust for the loose measurement if this is found on your NC chain. This could be one of the reasons for the vibrations some are feeling if the chain goes over-tight each revolution.
It does make measuring the slack more of a chore if like me you don't have a centerstand as yet.
Art
It does make measuring the slack more of a chore if like me you don't have a centerstand as yet.
Art