QuinnSea
Site Supporter
After reading some of the maintenance threads I decided to remove the drive sprocket cover and "clean the gunk out". I cleaned the area and cleaned/lubed the chain and now I have noise coming from the sprocket gear while rotating the rear tire on the center stand while in neutral. I did notice that the drive sprocket has some play although the sprocket bolt is tight, is that normal? Any words of wisdom please?
Below is a picture of the alignment
Here is a short video of the sound
[video=youtube_share;bqdc6lgiyFY]https://youtu.be/bqdc6lgiyFY[/video]
Below is a picture of the alignment
Here is a short video of the sound
[video=youtube_share;bqdc6lgiyFY]https://youtu.be/bqdc6lgiyFY[/video]
Last edited: