Mandalorian
New Member
Just been perusing the forum for highway peg info. Seems like the Kury 1.35 will fit on the frame's 1 3/8 tubing. Is that correct. Its an older posting. It shows that clamp with Kury offset unit as fitting nicely. Thoughts ?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I've bought two different sets of pegs and three different kinds of clamps. None of them worked. I've given up on trying to make highway pegs for the NC700x and am just waiting until someone markets something made the for the 1.5" diameter tubing.
I'm hoping HondaPro (on this board) will make something.
To be more accurate, I can find pegs that fit, but they're $100 plus... for pegs? No, I'll wait.
You didn't like my suggestion of taking the bits you've already bought to somebody with a welder?
I bought a set of these andd they fit perfectly. Offset Highway Pegs | Foot Controls | Küryakyn
They were quite a bit more than I ever expected to spend ($100) but they are so adjustable they lured me in.
You can spin the clam in almost any configuration you want which is great, you can put the pegs where you want within the radius of the clamps adjustablity.
I'd post a picture but I am at work right now and with the tropical storm moving through I didn't ride the bike tonight. I can post one later if you'd like.
I would love to see a pic. Be interesting to see where you mounted them.
Mike, yes. I remember your suggestion every time I see the un-used pegs on the patio. I don't know any welders though, but I am grateful for the advice.
I would love to see a pic. Be interesting to see where you mounted them.
Mike, yes. I remember your suggestion every time I see the un-used pegs on the patio. I don't know any welders though, but I am grateful for the advice.
So what size are the clamps. Are they 1.35? They look great. Did you get them from Kury?
Didn't want to spend a lot on highway pegs! I have already put bags, luggage rack, and a windshield on. SOLUTION: bought cheapo pegs from J. C. Whitney. $18. Sku:352477, pn 171300.
They were too small to fit the 1.4" down tube. Shimmed them open about .435". Bought an $18 step drill from Harbor freight that has max diameter of 1 3/8". Clamped the Shimmed bracket securely and opened up the hole with the the step drill in the hand drill. Smoothed the I'D with a file, used 1 1/2" socket screws to replace the shorter screws that came with the pegs, and done! On bike and they work great ! $36. Took 1/2 hour except for going to home depot.
Didn't want to spend a lot on highway pegs! I have already put bags, luggage rack, and a windshield on. SOLUTION: bought cheapo pegs from J. C. Whitney. $18. Sku:352477, pn 171300.
They were too small to fit the 1.4" down tube. Shimmed them open about .435". Bought an $18 step drill from Harbor freight that has max diameter of 1 3/8". Clamped the Shimmed bracket securely and opened up the hole with the the step drill in the hand drill. Smoothed the I'D with a file, used 1 1/2" socket screws to replace the shorter screws that came with the pegs, and done! On bike and they work great ! $36. Took 1/2 hour except for going to home depot.