Barkbuster Storm

Outrider1

Member
Joined
Dec 26, 2019
Messages
42
Reaction score
11
Points
8
Location
Sussex
Visit site
2018 model year with DCT. Any modifications needed to mount these, if so what?
Found information on earlier years and not sure if it applies.
 

DavidH

New Member
Joined
Oct 14, 2018
Messages
2
Reaction score
0
Points
1
Location
Johannesburg, South Africa
Visit site
I have these fitted to the same model.
I was unable to remove the standard in-bar anchor for the end-weights. The You Tube videos for this task were for the older models, did not work for the newer model. I spent hours on this and eventually gave up.

I left the in-bar anchors in and fitted the Barkbusters at the end of the end-weights. This required some modification to get it to fit nicely.
If you can get the standard in-bar anchors out, you should not have a problem.
See attached pictures
 

Attachments

  • IMG_20190521_084352.jpg
    IMG_20190521_084352.jpg
    108.2 KB · Views: 26
  • IMG_20190521_084411.jpg
    IMG_20190521_084411.jpg
    115.4 KB · Views: 26

Outrider1

Member
Joined
Dec 26, 2019
Messages
42
Reaction score
11
Points
8
Location
Sussex
Visit site
I have these fitted to the same model.
I was unable to remove the standard in-bar anchor for the end-weights. The You Tube videos for this task were for the older models, did not work for the newer model. I spent hours on this and eventually gave up.

I left the in-bar anchors in and fitted the Barkbusters at the end of the end-weights. This required some modification to get it to fit nicely.
If you can get the standard in-bar anchors out, you should not have a problem.
See attached pictures
thanks for the information
 
Top