+1. Seat makers need to develop a solo seat that matches up with a cargo base in place of the passenger seat, complete with fuel access door/opening.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Yes. I tried the locking gas cap from my Honda Ruckus and it fit right on the NC700X.
View attachment 10479
So today I was out in the garage playing around with an idea for making something like this, and while trying to push bolts though the holes on the bracket for the passenger seat I accidentally pushed out one of the metal bushings (or whatever their called) and it fell down somewhere inside the bike. I think maybe it went in under the gas tank, can't see it anywhere, and didn't seem to fall out on the floor. Am I going to have to pull all the bodywork off to get it out? and if so how do I do that, I don't have a service manual, and I looked around on the forum but can't find anything about removing the body panels
So today I was out in the garage playing around with an idea for making something like this, and while trying to push bolts though the holes on the bracket for the passenger seat I accidentally pushed out one of the metal bushings (or whatever their called) and it fell down somewhere inside the bike. I think maybe it went in under the gas tank, can't see it anywhere, and didn't seem to fall out on the floor. Am I going to have to pull all the bodywork off to get it out? and if so how do I do that, I don't have a service manual, and I looked around on the forum but can't find anything about removing the body panels
I do it this way. It's flexible. I can move the pack back when I do have a passenger and when I don't there is room in the back on the rack.View attachment 10527View attachment 10528
your prayers have been answered folks
look new rack by hondapro..
um... is there a new rack by HondaBikePro?
Well I did this View attachment 10433
It is just a plastic cutting board I have since painted it black
Works great I don't have to remove camping gear to fuel up.
View attachment 10434
... I think I'm going to try to make something like this, only out of wood ...
sumo; this thread shows the finished product. http://nc700-forum.com/forum/nc700-mods/10100-home-made-rear-rack-gas-hole.html?highlight=rear+rack
It's pine mostly, just scrap wood that I had on hand. I may not ever use it, I can't lift my leg enough to get it over the seat except my swinging it over the rear, so anything on the rack will be in the way. For now I've put the pillion seat back on, it's a simple matter to change it out, just three bolts.
Dennis