Alabama Al
Member
I found some Expanded steel 1/2" X 12" at Home Depot. Next I wanted something to cover the edges with and looked in the weather stripping department. What I bought was some rubber that would go on glass, it has two sides with sticky stuff for both sides. I mesured the radiator and added 1" to the top and bottom. Then I doubled it over 1/2" all around, cuting out the overlap on the corners. Next install the weather stripping around the edges. I painted it with high heat spray paint. On the radiator there is a fin like thing along the tank, I took a piece of vaccume line and split it down the center and super glued it to the radiator. It is mounted with four 3/8" heavy duty wire ties. If you decide to make this and something happens I am not liable. I rode my NC700X DCT 225 miles yesterday & everything worked ok.