mzflorida
Site Supporter
- Joined
- Jul 3, 2017
- Messages
- 1,445
- Reaction score
- 1,360
- Points
- 113
- Location
- Estero, Florida
I ordered the YSS Front Fork Upgrade Kit from EPM Performance after having a conversation with the folks there about what I was trying to achieve. It comes with springs, spacers, fork caps that allow for preload adjustment, and a cartridge emulator. EPM Performance folks say that in the latest iteration of this product there is no need to add the two additional 8MM holes and YSS has removed that from their installation procedure. They also said that they have received zero complaints about this new design. However, he qualified that they are selling a lot of these kits for 21 and later and have sold fewer for the previous model years. Here is my question. Should I still drill the additional 8MM holes despite the change made by YSS? I've learned a lot more about suspension over the past couple of years but still am a novice so I appreciate any input.
Though not directly related to the above, I also ordered a Hyperpro rear shock with remote preload adjuster. EPM Performance give us veterans a pretty generous discount.
Thanks.
Though not directly related to the above, I also ordered a Hyperpro rear shock with remote preload adjuster. EPM Performance give us veterans a pretty generous discount.
Thanks.