scrumpymike
New Member
- Joined
- Mar 25, 2012
- Messages
- 104
- Reaction score
- 0
- Points
- 0
- Location
- Somerset county, England
Here's a couple of pics showing my Givi screen / Palmer Products (made here in the UK) adjustable brackets set-up and the rad guard I made to fit the handy mounting points on my SW Motech crash bars. Only just fitted the Palmers and still experimenting with the 9 preset screen positions (3 for height, 3 for rake angle). Will report back when I've found the best setting but my initial feeling is that, while this set-up is better than the Givi screen alone, the improvement isn't as big a step as I got by replacing the small OE screen with the Givi mounted in the fixed (i.e. factory) position.
http://i1149.photobucket.com/albums/o598/scrumpymike/003_zpsac85bda3.jpg
http://i1149.photobucket.com/albums/o598/scrumpymike/005_zps6af4adf1.jpg
http://i1149.photobucket.com/albums/o598/scrumpymike/011_zps1f913573.jpg
http://i1149.photobucket.com/albums/o598/scrumpymike/021_zpsabb095e6.jpg
I think I'll probably wind up adding a semi-rigid 'dash panel' like I did on my TDM (see below) to get better laminar airflow and protect the instrument cluster from the worst of the rain and road muck.
http://i1149.photobucket.com/albums/o598/scrumpymike/004_zps02c8029f.jpg
Ride safe!
http://i1149.photobucket.com/albums/o598/scrumpymike/003_zpsac85bda3.jpg
http://i1149.photobucket.com/albums/o598/scrumpymike/005_zps6af4adf1.jpg
http://i1149.photobucket.com/albums/o598/scrumpymike/011_zps1f913573.jpg
http://i1149.photobucket.com/albums/o598/scrumpymike/021_zpsabb095e6.jpg
I think I'll probably wind up adding a semi-rigid 'dash panel' like I did on my TDM (see below) to get better laminar airflow and protect the instrument cluster from the worst of the rain and road muck.
http://i1149.photobucket.com/albums/o598/scrumpymike/004_zps02c8029f.jpg
Ride safe!