Mikee3544
Member
I didn't find the exact topic for a non NC problem but this can be a general problem. On my CBR250R(2011) the gear shift lever completely stucked during the winter. Last time I used it was in late october. It worked properly, but this weekend I started the engine and I was unable to change gear at all. I had to stop the engine and checked the parts. The clutch operates well ( clicking sound comes from the right side from the block ). But the lever didnt move at all. So I made a harder pressure by hand on it and finally it moved down to first gear. After starting the engine with engaged clutch and slowly diseangaged it the bike started to move forward as it did earlier. But since then shifting gears is extremely hard, so I left home and made the test in the garage. It changed gears from 1->N->2 and backwards, but the previously well known points in each gears disappered. It was that kinda feeling when you try pull out a spoon from an almost frozen bottle of honey.
What can be the problem? Engine oil was changed last summer, since then only 7000 kms done. Oil lever is ok! The engine was stopped whole winter, no attempts were made to try the shift lever or start the engine since yesterday.
sorry for the non NC topic, but this can be a general error to any kind of bike...
Any suggestions? Oil change or disassembly of the shift lever?
What can be the problem? Engine oil was changed last summer, since then only 7000 kms done. Oil lever is ok! The engine was stopped whole winter, no attempts were made to try the shift lever or start the engine since yesterday.
sorry for the non NC topic, but this can be a general error to any kind of bike...
Any suggestions? Oil change or disassembly of the shift lever?