A few people have been scammed on the site, Only use paypal to pay for items for sale by other members. If they will not use paypal, its likely a scam NEVER SEND E-TRANSFERS OF ANY KIND.
Hey guys I'd like to actually sell back one of the rear racks with fuel hole I got a little over 2 years ago. I actually had to ship the bike abroad and chose to keep the rear seat for passengers so I've got this rack left here in Chicago
If anyone's interested PM me, it's got some scratches...
Ah well darn... where might I find one of these testers? My dealership is way out in the suburbs so it's tough to get to them.
Is it something like this: Diagnostic Tester for Honda Acura Honda HDS Diagnostic System Kit | eBay ?
Thanks!
Hey all,
Been getting some issues with ABS recently, light comes on, transmission starts to fail...
How might I find out if it's either of the ABS sensors that are faulty? What kinds of resistance values should I be expecting when measuring with multimeter?
Thanks!
Yes I went for a longer shock, however due to the diameter of the spring I was not able to get the full 1.8" raise I wanted. It can only go as far as about 1.2" or something like that.. tough to measure. I would say that a shock meant for an extra inch AND a shorter shock link would be ideal
Alright well I got 3 responses between 138lbs and 155lbs. Honda says the DCT model is 26lbs heavier, so 164-181 lbs for that one.
I'm actually surprised, I figured more of the weight was from the engine block.. that represents only %30 of the fully fueled weight of the bike.
FYI: Engine oil is...
Hey all, does anyone have an idea of how much of the total weight of the bike is the engine & transmission block (with oil)...? Or even better, the actual weight?
Thanks!
Oh I see awesome! I did not realize the switch was connected to a motor to pull the cable hehe.
Yea I was hoping for a simple mechanical push lever (: Can't seem to find any of those online though /:
Thanks for the info! THis switch? RP8200B2M1CEBLKBLKRED E-Switch | Switches | DigiKey
Isn't this an electric switch though? Shouldn't we be looking for mechanical action instead?
Hey all,
My frunk lock has been working really bad and spraying some PB Blaster isn't getting it all the way clean either. I've taken the whole thing apart, cleaned and rebuilt but it seems the key section/assembly itself is bad... I can still open it but it tends to bend my key...