NovaGeeze
Member
Hey folks, wondering where the Healtech Thunderbox users have been mounting their units.
I want to keep my setup clean/hidden as possible, keep the accessory wiring blocks easily accessible right there underneath the cowl behind the handlebars, and not use up space in the frunk since my helmet sits in there so nicely. The two spots that seem to me easiest for my 2023 are in front of the frunk under the main body cowl (there's a nice steel bracket there that would hold it well, esp with a combination of velcro plus zip tie. Other option I'm considering is inside the tool indentation of the frunk, if I cut a small hole to feed the wires through. That would be a bit fussier looking, but wouldn't impede frunk use and *would* allow seeing the LED status light on the unit. In either of those cases, however, I'll need to lengthen the leads back to the power supply because from there, the battery's too far back.
Where are folks with the newer model with the battery behind the frunk putting their Thunderboxes?
I want to keep my setup clean/hidden as possible, keep the accessory wiring blocks easily accessible right there underneath the cowl behind the handlebars, and not use up space in the frunk since my helmet sits in there so nicely. The two spots that seem to me easiest for my 2023 are in front of the frunk under the main body cowl (there's a nice steel bracket there that would hold it well, esp with a combination of velcro plus zip tie. Other option I'm considering is inside the tool indentation of the frunk, if I cut a small hole to feed the wires through. That would be a bit fussier looking, but wouldn't impede frunk use and *would* allow seeing the LED status light on the unit. In either of those cases, however, I'll need to lengthen the leads back to the power supply because from there, the battery's too far back.
Where are folks with the newer model with the battery behind the frunk putting their Thunderboxes?