Sold SOLD MadStad Adjustable Windshield System- 2016-2020 NC700X (Let my mistake be your gain!)

[Red Rover]

MadStad Adjustable windshield with brackets and hardware for a 2016-2020 NC700X.

Does not include the side-deflectors (winglets).

My sad story:
After carefully reading this forum, I was very excited to order what I thought was a Madstad Windshield for a 2012-2015 NC700X from an Ebay vendor for my 2014 NC700X. I was like a kid on Christmas when it arrived, I pulled it out, and then, like a kid discovering it was the wrong color Power Ranger- I realized the brackets in no way lined up with my windshield mounting holes. After some quick emails with MadStad (shout out to a GREAT company) and the Ebay vendor, it turns out the system was for the 2016-2020 model, and there was no compatibility. While I was disappointed, the vendor was great, apologized and gave me a full refund (Craighrc- great business, I’m bummed it didn’t work out- it was an honest mistake on their part).

Let my loss and lack of homework be your gain.

I’ve included pictures of the system, part of my correspondence with Madstad, and links to the MadStad product page and instruction manual for the part below.

Hoping to get $100, OBO. Open to swap or partial swap for heated grips, a center stand, or a larger windshield that actually matches my bike.
Will ship to CONUS.


Product page:
https://madstad.com/products/honda-nc700x-2016-2020?_pos=1&_sid=b9e4bbb73&_ss=r

See installation guide here to compare with photos of the parts:
https://cdn.shopify.com/s/files/1/1461/7414/files/Manual_-_Honda_NC700X-NC750X-2016.pdf?v=1697128427

Email:

Photos of the system for sale:

 

[CamaroEric]

How handy are you? I made an adaptor plate to fit my old BMW Madstad onto my Honda. I would call it easy if you have patience and a tiny bit of fabrication experience.

 

[GregC]

This is a “sport” sized Madstad (i.e., smal)?

 

[Speedracer24]

How tall is the windshield ?

 

[GregC]

looks like a 16" if I had to guess.

 

[Red Rover]

This is a “sport” sized Madstad (i.e., smal)?

Sorry for the delay- it's about 20', see picture

 

[Red Rover]

How handy are you? I made an adaptor plate to fit my old BMW Madstad onto my Honda. I would call it easy if you have patience and a tiny bit of fabrication experience.

I thought about it. I'm a little handy, but not at fabrication, especially metal and plastic, and I have a limited set of tools.