waverunner22
New Member
I just bought a Sedici Heated Jacket Liner , and would like some help on how to run the cord from the battery to my Jacket. Thanks!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Like others I run mine exactly like this. There is enough space to run the heated gear harness out the left side of the battery box after connecting directly to the battery terminals, then lead the wires along the left frame tube and across the top of the fuel tank exiting under the seat. Take the seat off during installation. I think I used a coat hanger to fish or pull the wires through the space between the frunk and the left side frame tube. Tape the end of the coat hanger so as not to scratch the paint or plastic. Honda's clear coat on the painted parts is soft and easily marred/scratched so I am careful not to let the wire harness contact or rub on painted parts - by running the lead out from under the seat in this location the wires won't rub on the paint and can be tucked out of sight and weather when not in use.I have the receptacle / Female plug installed just under my seat.
View attachment 10614
The male controller wire in my jacket plugs into the female on the bike.