MRA X_Creen

[Alabama Al]

I received MRA X-Creen a couple of days ago. I mounted it on my Cal Si Med windshield. I took it for a ride yesterday, it took about 4 adjustments to get it were I wanted it. I rode at speeds between 45 & 80mph. The wind went over my helmet and it was a far more comfortable ride. I use ear plugs most of the time, befor I put the Creen on even with the plugs in, I could hear wind noise with the shield down on my full face helmet, but no more. http://http://www.ebay.com/itm/MRA-X-Creen-XCTA-Univ-Add-On-Adj-Air-Deflector-Flip-Spoiler-CLEAR-YAMAHA-/271160957075?pt=Motorcycles_Parts_Accessories&hash=item3f2273d893&vxp=mtr

 

[GsVs]

Looks good on the NC, looks like it was made for it - great to hear it works ...

I received MRA X-Creen a couple of days ago. I mounted it on my Cal Si Med windshield. I took it for a ride yesterday, it took about 4 adjustments to get it were I wanted it. I rode at speeds between 45 & 80mph. The wind went over my helmet and it was a far more comfortable ride. I use ear plugs most of the time, befor I put the Creen on even with the plugs in, I could hear wind noise with the shield down on my full face helmet, but no more. http://http://www.ebay.com/itm/MRA-X-Creen-XCTA-Univ-Add-On-Adj-Air-Deflector-Flip-Spoiler-CLEAR-YAMAHA-/271160957075?pt=Motorcycles_Parts_Accessories&hash=item3f2273d893&vxp=mtr

 

[turbodieseli4i6]

Looks good! Glad to hear it stopped the wind noise. I may have to put this on the list now.

 

[Cagedodger]

That's pretty slick looking. I can't say that I've ever heard anything negative about those Vario units.

Do you look over or through this setup?

 

[marc]

I received MRA X-Creen a couple of days ago. I mounted it on my Cal Si Med windshield. I took it for a ride yesterday, it took about 4 adjustments to get it were I wanted it. I rode at speeds between 45 & 80mph. The wind went over my helmet and it was a far more comfortable ride. I use ear plugs most of the time, befor I put the Creen on even with the plugs in, I could hear wind noise with the shield down on my full face helmet, but no more. http://http://www.ebay.com/itm/MRA-X-Creen-XCTA-Univ-Add-On-Adj-Air-Deflector-Flip-Spoiler-CLEAR-YAMAHA-/271160957075?pt=Motorcycles_Parts_Accessories&hash=item3f2273d893&vxp=mtr

What model MRA did you get , I have the SciCal large windshield and was wondering if it would fit ?
Can you measure the distance between the mounting points and post, I’d be most appreciative. Thank

 

[Alabama Al]

I look over it. I had a Clearview on my Silver Wing that I looked thru. One time coming from Texas I had to ride thru rain for about 100 miles. In order to see, I had to stretch way up so I could see above the shield. It was not fun. I now have a Givi Air Flo on it. This set up on the NC works the same. If Givi ever makes a Air Flo for the NC, I would buy one when this set up gets broken. I bought the one that is screwed on to the windshield.

 

[marc]

The link you provided is no longer going to the MRA model you bought. Could you kindly let me know what model you bought, I would love to buy one. Thanks, Marc

 

[Alabama Al]

The one listed on ebay for $130. I bought the clear one. Between centers it mesures 10 3/16" It is called MRA X-Creen XCTA Univ Add on air deflector Flip Spoiler. They give you a templet to put on your windshield to know were to drill the holes. Befor you try to put it on your shield, put a hunk of masking tape on it from top towards the bottom & mark the center. Then without removing the backing from the template, position it. See were the top is on both sides, remove it & put masking tape there. Again put the template on the shield, mark were the top goes on the tape, then remove the backing & install it. I drilled the shield in 3 steps. Hopefully this link will work. MRA x Creen Xcta Univ Add on Adj Air Deflector Flip Spoiler Clear Yamaha | eBay

 

[marc]

Thanks so much for the info, I'll be buying one.
Marc

 

[GsVs]

just a FYI ..... when the ebay link expires ... they are also sold at ...

MRA X-creen Add-On Variable Windscreen Spoiler Blade (bolt-on) - TwistedThrottle.com

 

[marc]

Installed my MRA X creen

I installed my MRA X creen over the weekend with some disappointment. The ad on wind deflector is nicely made and I think it looks fine. It works grate at low speeds to about 60 miles an hour. After that at about 80 miles a hour the extra weight and surface area causes the SiCal large windshield to bend back. IT bent back so far that it took a lot of the benefits away and once again I was in the blast of air with the wind noise again ringing in my ears. I have not given up yet. I need to make some sort of brace to prevent the bending. If I can manage this I’ll keep the creen or I’ll be buying the next option and last for me.

 

[Cagedodger]

The SiCal bent? I always had the impression that it was too thick to bend easily. I could see the tall Honda shield doing that though.

 

[marc]

The SiCal bent? I always had the impression that it was too thick to bend easily. I could see the tall Honda shield doing that though.

I had both windshields, the Honda tall is much smaller than the Calsci and it is braced about midway up on the screen.