MotoMachines
New Member
- Joined
- Aug 6, 2014
- Messages
- 139
- Reaction score
- 0
- Points
- 0
- Location
- Sterling, Virginia
The “Lock-it” System is an innovative design from Hepco & Becker for mounting hard side cases to your bike while having the option to remove the mounting frames and return to the original look and style of your bike in a matter of seconds.
Many riders do not use their luggage all the time, especially on short or daily commutes, and would prefer not to have the mounting frames installed for reasons of aesthetics as well as practicality. On the lock-it side carrier, there are a few small initial attachment plates that are simply bolted to your bike without any drilling necessary. From that attachment plate, you simply attach the mounting frames using Hepco & Becker's quarter-turn Lock-it fasteners. These fasteners have an Allen head pattern allowing for quick installation and removal of the side carriers, leaving you with a near original look bike when not installed.
Each bike has its own custom made system specific to that one model. This side carrier will accept all of the hard side cases offered by Hepco & Becker - 8 different models and 40+ different styles to choose from.
Anti-theft protection is available as an added security feature thanks to the lockable Lock-It system fastener (151.050). These locks replace the standard Lock-it fasteners requiring a key to install and remove the mounting frames (only one needed per side).
Pictured: Journey Recon
Pictured: Xplorer
Lock-it Side Carrier - Honda NC 700 X
Hard Luggage
Many riders do not use their luggage all the time, especially on short or daily commutes, and would prefer not to have the mounting frames installed for reasons of aesthetics as well as practicality. On the lock-it side carrier, there are a few small initial attachment plates that are simply bolted to your bike without any drilling necessary. From that attachment plate, you simply attach the mounting frames using Hepco & Becker's quarter-turn Lock-it fasteners. These fasteners have an Allen head pattern allowing for quick installation and removal of the side carriers, leaving you with a near original look bike when not installed.
Each bike has its own custom made system specific to that one model. This side carrier will accept all of the hard side cases offered by Hepco & Becker - 8 different models and 40+ different styles to choose from.
Anti-theft protection is available as an added security feature thanks to the lockable Lock-It system fastener (151.050). These locks replace the standard Lock-it fasteners requiring a key to install and remove the mounting frames (only one needed per side).
Pictured: Journey Recon
Pictured: Xplorer
Lock-it Side Carrier - Honda NC 700 X
Hard Luggage
