Recent content by Piair

I have just been riding a new NC750X while my 700 was in for service and i have to say that it was a shock. I had completely forgotten about wind blast and found it surprisingly hard, hanging on. Perhaps I have just gone soft in my old age but the Calsci screen makes a fantastic difference in...

I've used this for 2 or 3 thousand miles now and even at 95 mph cruise have had no issues at all. It provides a still air pocket behind that allows visor or flip front riding with no discomfort at all. I don't foresee any issues arising but should any occur I will post on here.

used the normal calsci holes and have found that to be plenty no problem even at 95mph cruise.

I will post some pics when I work out how

Hi, the mounting, as I remember it, was straightforward. Using the mounting holes on the screen with the stainless screws and screw caps, plastic spacer plates and the Honda mounting plates with frame. Thinking about it, a friends assistance would be a good idea just to hold things whilst you...

hi Netizen, i have tried posting reply with instructions and pics, but god knows where it is. so if you don't see it let me know and I'll try again

Hi, the mounting, as I remember it, was straightforward. Using the mounting holes on the screen with the stainless screws and screw caps, plastic spacer plates and the Honda mounting plates with frame. Thinking about it, a friends assistance would be a good idea just to hold things whilst you...

Hi, the mounting, as I remember it, was straightforward. Using the mounting holes on the screen with the stainless screws and screw caps, plastic spacer plates and the Honda mounting plates with frame. Thinking about it, a friends assistance would be a good idea just to hold things whilst you...

Hi, the mounting, as I remember it, was straightforward. Using the mounting holes on the screen with the stainless screws and screw caps, plastic spacer plates and the Honda mounting plates with frame. Thinking about it, a friends assistance would be a good idea just to hold things whilst you...

I'm using the Calsci with the Honda touring screen mount which is very stable. I have a crack at on of the mountings but put that down to me over tightening it. I drilled a tiny hole at the end of the crack and this seems to have sorted it. I have cruised at 95mph and no further problem with it.

Hi, I'm 5'9" with 31"inside leg. I'm using a Calsci screen on Honda touring screen mounting frame. This is more robust than just the standard mount. It offers good protection and I normally ride visor open without problem. What I have found is that 80+ cruising, with full luggage fitted will...