• A few people have been scammed on the site, Only use paypal to pay for items for sale by other members. If they will not use paypal, its likely a scam NEVER SEND E-TRANSFERS OF ANY KIND.

Recent content by dlare

  1. dlare

    CTX sidestand for lowered 700X?

    Phil, I bought a CTX sidestand on ebay for my lowered NC. It seems to work fine. I did also make a little aluminum plate that I bolted to the bottom of the stand for a little larger footprint. Dean
  2. dlare

    Sport mode 6th gear

    If I'm in sport mode and want to cruise in 6th gear, I simply click the upshift trigger. If the bike speed is at or above 55 mph, it will shift into 6th.
  3. dlare

    Honda bringing the NC750X to the USA.

    AMEN! I'd vote for this as well.
  4. dlare

    Fobo Bike Bluetooth TPMS - Unboxing and Installation

    Here's what I did with my rubber valve stems until my next tire change: Couple of zip ties hold the valve stem in its upright position. Deano
  5. dlare

    Has anyone upgraded the ECM (PGM-FI unit)?

    Specifically, I'd be interested in upgrading my 2015 to the 2016 PGM-FI unit, to get the extra DCT shift modes. Anyone attempted this upgrade? Deano
  6. dlare

    Valve stem advice?

    Lol! Sent from my XT1650 using Tapatalk
  7. dlare

    lowering links

    I used the NC spring. Sent from my XT1650 using Tapatalk
  8. dlare

    Recommended Kickstand for Lowered NC700/750S?

    I lowered mine a little over an inch. Then i bought a CTX700 side stand on eBay to replace the stock NC700 side stand. The CTX700 stand is a little shorter and seems to give mine about the right amount of lean. Dean
  9. dlare

    lowering links

    I lowered mine a little over an inch. Then i bought a CTX700 side stand on eBay to replace the stock NC700 side stand. The CTX700 stand is a little shorter and seems to give mine about the right amount of lean. Dean
  10. dlare

    Short metal valve stems

    I had my 1000 mile factory tire replaced today due to a gash in it causing flatness. I didn't notice til I got home that the dealer had changed the valve stem from the really short factory stem to a taller rubber stem. I am using my old TPMS system so I used a few zip ties to stabilize the...
  11. dlare

    Valve stem advice?

    I had my 1000 mile factory tire replaced today due to a gash in it causing flatness. I didn't notice til I got home that the dealer had changed the valve stem from the really short factory stem to a taller rubber stem. I am using my old TPMS system so I used a few zip ties to stabilize the...
  12. dlare

    SHAD Comfort Seat

    Broke Sent from my SM-T710 using Tapatalk
  13. dlare

    Is the 2016+ combination meter swapable with a 2015 meter?

    Has anyone tried to direct swap a 2016 combo meter onto an older NC, say a 2015? And if so, do all the functions work as they would on a 2016? Deano
  14. dlare

    MadStad adjustable windshield system for the Honda NC700x

    I first installed my Madstad system according to the included instructions, went for a ride. It was certainly better than the stock screen, but still had a little buffeting. So i decided to try flipping the winglets upside down to block the air coming up around my head. Success! With the...
  15. dlare

    What mtorcycle did you use for your driving test?

    I used my Suzuki GS450TX. The day of my testing appointment, the clouds let loose and poured rain most of the day. I said the heck with it and drove the 20 miles to the testing site anyway. Of the 12 scheduled, only two of us showed up. We took the test in the middle of a downpour, and passed...
Back
Top