nut plates for winshields

HONDABIKEPRO

Supporting Vendor
Elite Member
Site Supporter
Premium Member
Joined
Nov 14, 2012
Messages
586
Reaction score
3
Points
18
Location
WASHINGTON ST lakewood
new nut plates for windshield to replace the rubber well nuts that honda uses,, i now have two one is 5mm the other is 6mm, the 6mm will work with honda touring shields or any that may use a 6 bolt,, if you have a honda touring shield you can raise it to the top holes to gain about a inch, you will need longer bolts,, you can also put in a spacer to move the windshield forward, or change the angle, by putting spacers under the shield or mount, to clear hand guards.
5mm or 6mm plates 25.00 plus shipping dale





 
Last edited:

Bug Dr.

New Member
Joined
Sep 26, 2012
Messages
731
Reaction score
0
Points
0
Location
Southern Ozarks
Nice Dale! I might get some to raise my tall Honda screen up a bit. I need more seat time to tell for sure though.
Mike
 

duk2n

Site Supporter
Joined
Jul 4, 2012
Messages
1,024
Reaction score
0
Points
0
Location
Spain
Dale, I think you could sell some of these to us European guys if you tell us how much would be the shipping cost.

More over, if you're interested I can forward you ad to the spanish forum
 

DanWill

New Member
Joined
Jan 20, 2013
Messages
367
Reaction score
0
Points
0
Location
Oakwood Tx
I used the original bolts and plates to move my honda touring shield up to the top holes... There were no issues with it.
 

showkey

Super Mods
Joined
Dec 2, 2012
Messages
1,868
Reaction score
31
Points
48
Location
Wausau WI
I used the original bolts and plates to move my honda touring shield up to the top holes... There were no issues with it.
Same here...........but the plate area around the top "nut" needed to ground away a small amount for clearance.
 

HONDABIKEPRO

Supporting Vendor
Elite Member
Site Supporter
Premium Member
Joined
Nov 14, 2012
Messages
586
Reaction score
3
Points
18
Location
WASHINGTON ST lakewood
Same here...........but the plate area around the top "nut" needed to ground away a small amount for clearance.
some will fit,without , some will not, these will fit, i think it is the aluminum casting dale
 

HONDABIKEPRO

Supporting Vendor
Elite Member
Site Supporter
Premium Member
Joined
Nov 14, 2012
Messages
586
Reaction score
3
Points
18
Location
WASHINGTON ST lakewood
if anyone needs 5 or 6mm nut plates i have about 20 of each, and one aluminum skid plate for nc700x dale
 

DominusFL

Elite Member
Joined
Feb 13, 2013
Messages
254
Reaction score
0
Points
0
Location
Orlando, FL
Which is the original bolt size, 5 or 6mm? Guess I'm a little confused why you have to offer two sizes.
 

Chris

Elite Member
Joined
Jan 3, 2013
Messages
333
Reaction score
0
Points
16
Location
Switzerland
I think 5mm are the bolts that come with the original screen but the touring screen comes with 6mm bolts.
 

StratTuner

Site Supporter
Joined
Mar 11, 2013
Messages
3,486
Reaction score
17
Points
38
Location
California
I purchased a set, and they are outstanding. When I fitted them in place, it occured to me that this is what the Honda engieers should have done in the first place!
I wouln't consider using anything else.

If I ever offer the windshield I did for myself for SALE, I'll include this as part of the kit.
hmmm...let's total this up now:
sheet of lexan, $25,
Dale's plates $25,
rubber mount washers, $5,
shipping (???), $25...
we're up to $80 with NO PROFIT margin...
calculations like that make you appreciate what windshield makers charge. They don't make much on those.
 

showkey

Super Mods
Joined
Dec 2, 2012
Messages
1,868
Reaction score
31
Points
48
Location
Wausau WI
I purchased a set, and they are outstanding. When I fitted them in place, it occured to me that this is what the Honda engieers should have done in the first place!
e.
They ( the Honda engineers) did for the larger Honda Touring screen..............which comes with nut plates.
 

kjang

Member
Joined
Mar 1, 2013
Messages
776
Reaction score
1
Points
18
Location
san francisco
I have the tall Honda windshield (touring), so If I get dale's aluminum mounting I can get another inch of height on the windshield???

Ken
 

StratTuner

Site Supporter
Joined
Mar 11, 2013
Messages
3,486
Reaction score
17
Points
38
Location
California
I have the tall Honda windshield (touring), so If I get dale's aluminum mounting I can get another inch of height on the windshield???

Ken
Ken, I wouldn't want to say "yes" to that without trying it first, but it makes sense to me that you could because the windshield is now way more secur than it was before. If you try it, please post your results as others may have the same question.
 

kjang

Member
Joined
Mar 1, 2013
Messages
776
Reaction score
1
Points
18
Location
san francisco
Ken, I wouldn't want to say "yes" to that without trying it first, but it makes sense to me that you could because the windshield is now way more secur than it was before. If you try it, please post your results as others may have the same question.
thanks StratTurner. Will do.
I will contact dale.

Ken
 
Top