• A few people have been scammed on the site, Only use paypal to pay for items for sale by other members. If they will not use paypal, its likely a scam NEVER SEND E-TRANSFERS OF ANY KIND.

nc750 stalls after cold start

junior1786

New Member
Joined
Jul 25, 2017
Messages
11
Reaction score
0
Points
0
Location
IL
Visit site
Hi guys,
the bike is 2014 nc750x with 9K km on it (6K miles), with a brand new PGM-FI.
When i start the bike in the morning, it stalls after about a second or so.
If i give it a little throttle for a few seconds, it runs fine.
once the bike is warm, it starts, and drives perfect.
Is there any kind of throttle learing procedure to be done for the new ECU?
Thank you,
Dima.
 
Dirtflier- i'm from Israel, potterOo is correct about this one.
And the nc750 shares most of it's parts with the nc700 that you do have in the states...
 
Few years back, I was presenting at a convention in Chicago, and my name tag said i was from Ramat gan, IL- you should have see the faces and hear the questions of all the people who were sure that there is a new town in Illinois that they never heard of ;)
 
If it starts right up but stalls the engine could be flooding out. You might check the resistance of the engine coolant temperature sensor (ECT) when the engine is cold vs. after it has warmed up.
 
Back
Top