- Joined
- Nov 14, 2012
- Messages
- 587
- Reaction score
- 13
- Points
- 18
- Location
- WASHINGTON ST lakewood
i am going to revisit the dct, having cornering clearance problems, if the left and right cover protectors are not made out of 3/16 thick aluminum they wont hold up in a crash, and when you make them this thick they may touch on hard cornering, with a load on the bike, if you hit a dip in the road, cant have this. the stock cover on the right only covers up the ops sensors, if you drop it at all you could damage them in the parking lot!!!!! the left side shift motor rail has to come off for the plate to mount, witch is the guard for the motor, to fit the skid plate. so the left side plate of the skid plate has to be able to totally protect the end of that motor. i have to have clearance from the ops sensors and the shift motor, from the 3/16 side plates, so if you crash they don't cause more damage by folding in on these parts, then if you had not plate at all. I WILL KEEP TRYING TILL I COME UP WITH ONE THAT FITS THESE NEEDS. THANKS DALE
new skid plate for NC700 DCT finished, will post new pictures tomorrow. dale