NC700/750 Sport side-stand length

ducatiderek

New Member
Joined
Jan 30, 2020
Messages
18
Reaction score
1
Points
3
Location
West Sussex , UK
Visit site
Hi
Could a member with a Sport measure their side-stand length for me please ?
I have an X and want to lower the rear suspension an inch or so , I've bought a secondhand X side-stand and will shorten it to the S length when I have the measurement !
Could you measure it in a straight line from the centre of the pivot bolt to the outside tip of the foot , the X length is 9 3/4" [ 240mm ] .
many thanks
Derek
 
Joined
Nov 29, 2013
Messages
69
Reaction score
13
Points
8
Location
KS
Visit site
FWIW, I lowered the back of my 2012X 8 years ago exactly 1" and did not need to shorten the stock side stand. After lowering, I parked next to some other bikes at work and compared the revised lean angle and it's still in the average range. Just be aware when parking that the sidestand needs to be on the downhill and/or downwind side. I'm still riding it and have not had any issues in those 8 years.

Best of luck,
Saturday
 

Alias

Site Supporter
Joined
Jun 7, 2017
Messages
160
Reaction score
83
Points
28
Location
Northeast Ohio
Visit site
Bought this side stand from a fellow forum member a while back. It's supposed to be from a 700S.
 

Attachments

  • S 1.jpg
    S 1.jpg
    130 KB · Views: 31
  • S 2.jpg
    S 2.jpg
    142.9 KB · Views: 32

hansened

New Member
Joined
Jul 8, 2021
Messages
6
Reaction score
0
Points
1
Location
pattaya, thailanld
Visit site
Hi
Could a member with a Sport measure their side-stand length for me please ?
I have an X and want to lower the rear suspension an inch or so , I've bought a secondhand X side-stand and will shorten it to the S length when I have the measurement !
Could you measure it in a straight line from the centre of the pivot bolt to the outside tip of the foot , the X length is 9 3/4" [ 240mm ] .
many thanks
Derek
a similar problem with my ctx700 dcs ; Asian model that the side stand is for a usa/eu model and the bike is vertical ready to fall over. I hear the nc700S stand will work as 30mm lower. I hope to find one !
 

hansened

New Member
Joined
Jul 8, 2021
Messages
6
Reaction score
0
Points
1
Location
pattaya, thailanld
Visit site
Bought this side stand from a fellow forum member a while back. It's supposed to be from a 700S.
your measuring from bolt hole to the kick part or to the end. what is the length; I need one 30mm shorter for my ctx700. I have 17cm from bolt hole to the side kick bar. Sure wish we had honda dealers or anyone that was helpful !!
 
Top