Installed new Admore lightbar

Ticopilot

New Member
Joined
Jan 26, 2015
Messages
71
Reaction score
0
Points
0
Location
Costa Rica
I just installed a new Admore lightbar as an auxiliary tail light with break and turn signal functions. I am very happy with how it ended looking since Admore tells you to place it below the license plate but I thought that if I wanted conspicuity it needed to be where drivers were more likely to see it and that was just below the topcase. Has anyone else installed this or other such accesories to compare?
IMG_5463.jpg
 

smithb9

New Member
Joined
Nov 6, 2015
Messages
60
Reaction score
0
Points
0
Location
Boston MA
I have it too, love it. It's better where you have it now, I had it on my license plate and after a 140ish mile day on dirt I noticed my license plate was cracked on both sides and close to breaking in half, due to the added weight of the light and it bouncing around on rough roads.
 

bamamate

Elite Member
Joined
Oct 5, 2012
Messages
2,333
Reaction score
9
Points
38
Location
Allford, FL/Dothan, AL
I like it mounted up there. My topbox has lights so I mounted mine on the bottom of the license plate. Gives me 3 spaced out lights. I made a stiffener for the license plate after it started breaking.
 

bobcatTX

New Member
Joined
May 6, 2016
Messages
9
Reaction score
0
Points
1
Location
Austin, TX
Thank you for this great idea, I installed my Admore today in the same place, just under the topcase.
 

StratTuner

Site Supporter
Joined
Mar 11, 2013
Messages
3,494
Reaction score
41
Points
48
Location
California
I have [THIS] one installed on the rear edge of the top box platform so that it's visible no matter which top box I've mounted.

It's a VERY bright brake light, and it's good to have the turn indicators as backup should the existing turn signals fail.

It's also on sale (as of 25 June 2017) for $7. ...not bad...

I should add that I've also mounted this on the back of the top box as secondary brake light (minus the turn signals) just because it's so bright.

Pictures:
blight.jpgtsig.jpg

Amazon Search if the Link fails:
"Motorcycle LED Turn Signal Tail Brake License Plate Integrated Light Quad by kingshowstar"
 
Last edited:

kumatae

Member
Joined
Dec 23, 2016
Messages
342
Reaction score
1
Points
16
Location
So Cal
I see that admore lights come in two sizes. Is that the large or the small??


Sent from my iPhone using Tapatalk
 

lue42

Member
Joined
Jun 20, 2016
Messages
262
Reaction score
3
Points
18
Location
St Thomas, Ontario
Whatever lighting system you buy, I HIGHLY recommend Posi-Tap connectors. They make tapping into the bike's wiring incredibly easy and removable.

They come included with AdMore lights. My Admore lights were pre-installed in my used luggage, so I ended up buying my Posi-Tap's from Admore (Canadian distributor).

Posi-Tap- No Crimp Tap

These are the ones I bought and they were the perfect size for the NC - POSI-TAP 20-22 GA. LINE TAP (ADML-604) - AdMore Lighting Inc.

It's funny that they cost more than the Amazon light itself above... but, trust me, they are absolutely worth it. I really wish the company would get expand and get a big retailer contract to bring the prices and availability down.
 
Top