Vinny
Member
My high beam has failed on the 750X.. but to be honest, I tapped into the 5v wire in the back of the connector. I was needing a trigger to run some auxiliary lights when the high beam was switched on. I had isolated the light through a relay and didn't think the coil draw would be enough (on a micro relay) to do any harm. Well obviously it did because the high beam no longer works and not getting the blue high beam indicator on the dash panel.
So the big question is... Where does the 5V in the back of the headlight plug originate? There is 12v fed to headlight... is the 5v just power the dash indicator from a voltage divider network in the headlight itself, or is the 5v generated from the regulator and sent to the headlight? Obviously I don't have a manual so I'm asking here.
Thanks
So the big question is... Where does the 5V in the back of the headlight plug originate? There is 12v fed to headlight... is the 5v just power the dash indicator from a voltage divider network in the headlight itself, or is the 5v generated from the regulator and sent to the headlight? Obviously I don't have a manual so I'm asking here.
Thanks