• A few people have been scammed on the site, Only use paypal to pay for items for sale by other members. If they will not use paypal, its likely a scam NEVER SEND E-TRANSFERS OF ANY KIND.

Denali lights

glock3645

New Member
Joined
Jan 12, 2019
Messages
7
Reaction score
1
Points
3
Location
Richmond Ca
Visit site
I just purchased a 2018 NC750X DCT. I want to hook up Denali D2 2.0 tri-optic leds with data dim. My question is can I wire the data dim switch to my high beams or do I also need the Denali dry seal 2.0 hi low switch because I have LED headlights?
 
I just ordered a set of Denali LED lights, model DRL. Of course they are on back order.

So while mine are a different model than you are ordering I'm going do try to wire them right into the light switch.

[video=youtube;N8PzN9YwPaI]https://www.youtube.com/watch?v=N8PzN9YwPaI[/video]
 
My wife rides a 2018 Home Rebel 500...

Last summer we installed a LED headlight and Denali D2 with the DataDim. It works fine tied into the high beam.

So I'd *assume* it would work the same on the nc750.

Sent from my ASUS_Z01HD using Tapatalk
 
I just purchased a 2018 NC750X DCT. I want to hook up Denali D2 2.0 tri-optic leds with data dim. My question is can I wire the data dim switch to my high beams or do I also need the Denali dry seal 2.0 hi low switch because I have LED headlights?
If you dont have the Datadim controller, you won't be able to use them dimmed.
Denali's are 100% on without their proprietary controller.
How you wire it depends on how you want to use them:
https://d1l4i7f87txqmq.cloudfront.net/denali2/pdfs/VWG_Auxiliary Driving Lights_rev00.pdf
 
Last edited:
Back
Top