Yes, and I tested with the light probe and was working fine.
I found the problem, was my stupidity, I was using a cable too thin and the connection with turning lights wasn't good enough, replacing the cable with a thicker one did the job.
Thanks everyone for the help, appreciated.
Hi there, thanks for replying.
Here the wiring diagram https://images-na.ssl-images-amazon.com/images/I/410E1nd3jTL.jpg , I am using only the power cables (black and red) and the 2 yellow in my case, because I don't want to use immobiliser and start up functions.
I am just in the middle of installing a simple alarm (motion only) on my 750s.
I am having trouble to have the turning lights blimping when arming and disarming the alarm, I have connected the alarms cables for the lights on the orange and light blue cable on the rear turning...
Hello skeleton, I am installing a different alarm but on the same motorbike, I am using only the motion alarm without the immobiliser.
I am having trouble using the turning light to switch on when arming/disarming the alarm, I have connected the cable to the light blue and orange cables of the...