Recent content by InfernoST

I will check it out, thanks.

Thanks for the info, I will look into this.

I'm going to look into finding a steering damper the fits the bike properly. This is one amazing machine and am finding out the more you push it the more she delivers.

Just to clarify when I'm holding onto the bars you do not feel any vibration, I don't make it a habit of letting go of the bars but on occasion you need to stretch the digits.

I didn't take it the wrong way at all and understand exactly what you indicated. My Bike is the rare Manual not a DCT but that is exactly how i realized the problem. I'm very mechanically inclined but not to educated on bearings, wondering if its possible to replace the stock bearing with with...

I have the manual version.

That is a given but only did it see if the bars would wobble and sure enough they did, this should not be present on a brand new machine this is why I'm looking for the cause. thanks for your input but that answer is clearly obvious now if you had cruise control and need to quickly shake your...

One post here indicated they are not tapered bearing like I had on previous machines which the manufacturer outlined tightening to 70 ft lbs to complete the bearing seating process then back of 180 degrees then re=adjust the until it takes 1 to 2lbs of pressure to move the bars. The problem with...

It is in my service manual found it further back in section 17-29 which outlines everything, this was my fault, sorry about that. All that mentioned has already been done which leads me to the neck. After realizing analyzing what's going on as my bars flops to the right rather quickly led me to...

That is very valuable information because in my eyes it should not exist, I've owned many machine used and new and this is the first bike that is exhibiting this issue and I bought this new as a left over with 2 miles on it in late 2021. Question, when your front tire is off of the ground do...

Not much today, went to work came home and re-checked the balance of the front wheel in search for the reason of my handlebar wobble, next is tighting the stem nuts.

This is my bikes current configuration. I'm posting this to show how the bike is with all of the luggage, maybe there is something you see that may be a possible issue.

Thanks for the input guys, this Saturday I'm going to remove the top of the triple tree and make the nut tight enough so the bars dont flop to the right by themselves and see how the steering feels afterwards. A brand new bike shouldn't be doing this especially with all of the luggage removed...

Hi Gang I've been experiencing handlebar wobble for quite a while now, I originally chalked it up to the OEM supplied front tire had become scalloped. I recently replaced the front and rear tires with a different set of new dunlops at about 9000 miles and am still experiencing this front end...

Changed my oil, filter, replaced the chain, replaced the brakes, flushed out old brake fluid then went for a small ride and all is sooooo much better in the world after all that work. Looking forward to hitting deals gap this fall for the 1st time.