kaz
Member
I did my first "long" trip on the NC, around 180km. The buzzing of the pegs gave me a bit of an after effect in my feet. Was wondering. These seem to be our peg parts -
what happens is you use a rubber covered pin or a thinner pin wrapped in a piece of rubber? Or squeeze some rubber washers between that spring and the connecting walls of the peg (in the middle where the pin is running)?
I searched "rubber mounted pegs", doesn't seem to be a ready made contraption that I could find, only rubber covers like this -
Are these any good?
What's the proper spot to rubberize so that the buzzing doesn't reach your feet?
what happens is you use a rubber covered pin or a thinner pin wrapped in a piece of rubber? Or squeeze some rubber washers between that spring and the connecting walls of the peg (in the middle where the pin is running)?
I searched "rubber mounted pegs", doesn't seem to be a ready made contraption that I could find, only rubber covers like this -
1.27C$ 6% OFF|Footpeg Rubbers Plugs Foot Peg For Suzuki Ax100 Motorbike - Foot Rests - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
Are these any good?
What's the proper spot to rubberize so that the buzzing doesn't reach your feet?