Page 1 of 9 123 ... LastLast
Results 1 to 10 of 81

Thread: hondabikepro products

  1. #1

    Supporting Vendor

    hondabikepro products
    hondabikepro products
    HONDABIKEPRO's Avatar
    Bike: NC700X nc700xd
    Join Date
    Nov 2012
    Location
    WASHINGTON ST lakewood
    Posts
    580

    hondabikepro products

    1. nc 700x skid plates for standard model are 425.00 and includes powder coating. shipping is 45.00 in the us
    2.nc700x dct models skid plates are 475.00 and includes powder coating, shipping is 45.00 in the us
    3. I will make the plates for you when ordered, takes two weeks, add one week if powder coated.
    4.my plates are 3/16 aluminum, bent and welded together, they fit very tight on the frame. the plates bolt only to the frame of the bike with seven eight mm bolts, if you have sw-motech crash bars i make a special skid plate, that comes up in the front and bolts to the cross bar on the crash bars, this is the strongest of all skid plates and uses two more bolts to hold on. The plates also have a duck tail to protect the rear shock linkage.

    dct plate with left support bar, for sw-motech case guards





    standard plate in black



    standard plate



    1. nut plates to hold on your windshield. The rubber well nuts that Honda uses are for a short shield only. The taller shields may pull out the well nuts and you could lose you shield.
    they are 30.00 shipping is 7.00 in the us they come in 5 and 6mm size.









    1. folding shift lever are 75.00 shipping is 7.00, these are on a exchange bases. I will need your old shift lever mailed back to me after you get the new folding lever. Please no damaged levers. I cant sell them if they are damaged.



    1.rear racks for nc700 are 195.0 powder coating is 35.00 shipping 20.00 in the us.
    are available with or without the fuel opening, i can also provide a locking gas cap is needed 45.00




    I am working on the adventure racks but will be a few months, have to check fitment with other brands of saddle bags and mounts and seats.




    I am working on a fuel cell also that will auto feed in to main tank.





    if you would like any of the above parts just pm me .
    THANKS DALE

    i will only be making skid plates threw this week 5-10-2014 both of my dealer ships are very busy, i will make more this winter, but for now it is riding season. I will still be making nut plates, shift levers, and rear racks. If i have time i will make a couple of plates and post them if i do, the plates take about 8 hours to make, and just not enough time wright now. Thanks Dale
    Last edited by HONDABIKEPRO; 22nd November 2016 at 17:34.

  2. #2

    Supporting Vendor

    hondabikepro products
    hondabikepro products
    HONDABIKEPRO's Avatar
    Bike: NC700X nc700xd
    Join Date
    Nov 2012
    Location
    WASHINGTON ST lakewood
    Posts
    580
    You will be able to order oem parts from my lakewood store shortly, should have part catalogs available, to do online orders. tomorrow. Thanks Dale

  3. #3
    Senior Member hondabikepro products
    hondabikepro products
    turbodieseli4i6's Avatar
    Bike: 2012 NC700X Manual non ABS (07/27/12)
    Join Date
    Mar 2012
    Location
    Missouri
    Posts
    2,781
    Thanks Dale for making the needed parts for the NCX. I have feeling that you will have a lot of my hard earned money.

  4. #4
    Senior Member hondabikepro products StratTuner's Avatar
    Bike: NC700X model C
    Join Date
    Mar 2013
    Location
    California
    Posts
    3,446
    Dale. You are a craftsman, and I look forward to buying more "HondaBikePro" parts.
    (I didn't know you were in lakewood! California?....OOOOps...that Washington State!)
    - StratTuner
    NC700XFJR1300

    "If you don't understand him, and he don't die young,
    he'll probly just ride away."
    - Willie Nelson

  5. #5
    Senior Member hondabikepro products Fuzzy's Avatar
    Bike: NC700XD, MP3 400
    Join Date
    Oct 2012
    Location
    Central Georgia
    Posts
    4,130
    Dale,
    You say you make a special plate for SW Motech Crashbars. Will the standard DCT plate still fit if the Motech srashbars are on bike, but just lack the extra piece for special attachment to the bars?
    Apply dog logic to life:
    "Eat Well, Be Loved, Get Petted, Sleep A Lot, and Dream Of A Leash Free World."

    ATG ATT

  6. #6

    Supporting Vendor

    hondabikepro products
    hondabikepro products
    HONDABIKEPRO's Avatar
    Bike: NC700X nc700xd
    Join Date
    Nov 2012
    Location
    WASHINGTON ST lakewood
    Posts
    580
    The plates will fit with all crash guards. this is the sw-motech crash bars plate.


  7. #7
    Senior Member hondabikepro products Fuzzy's Avatar
    Bike: NC700XD, MP3 400
    Join Date
    Oct 2012
    Location
    Central Georgia
    Posts
    4,130
    Thanks Dale. I still haven't got my skid plate installed yet and had an UH OH moment that I may have failed to order properly. Glad to know mine will still fit.
    Apply dog logic to life:
    "Eat Well, Be Loved, Get Petted, Sleep A Lot, and Dream Of A Leash Free World."

    ATG ATT

  8. #8
    Senior Member hondabikepro products RiderCoach's Avatar
    Bike: 2012 NC700X
    Join Date
    Apr 2013
    Location
    Orlando
    Posts
    107
    Great work, thanks.

  9. #9
    Senior Member hondabikepro products Big Thump's Avatar
    Bike: 2012 Honda NC700X
    Join Date
    Jun 2013
    Location
    Florida
    Posts
    473
    Very nice work! American made and lot's of engineering went into those designs.
    "The Road Goes On Forever"
    IBA #23562

  10. #10
    Senior Member hondabikepro products frozenpoet's Avatar
    Bike: cbr600, NC700X
    Join Date
    Nov 2012
    Location
    Strasburg, VA
    Posts
    1,008
    Just a because I'm curious question. Why is the DCT skid plat that much more than the manual? Is it that much different? I have a Manual so it doesn't affect me, I'm just being curious.
    I get 63 MPG, what do you get? Speeding tickets?
    I pack to camp but stay in a hotel because I have no idea what I'm doing...

    instagram.com/J_in_the_va


    on two wheels

Similar Threads

  1. HONDABIKEPRO rear seat luggage plate
    By Beemerphile in forum NC700 Mods
    Replies: 13
    Last Post: 20th April 2015, 08:35
  2. Palmer Products Windscreen Adjuster
    By barrett50 in forum NC700 Mods
    Replies: 28
    Last Post: 30th August 2014, 12:02
  3. TCI Products stuff for NC700
    By 2brnut2b in forum NC700 Mods
    Replies: 24
    Last Post: 18th April 2014, 06:54
  4. Replies: 48
    Last Post: 18th July 2013, 05:53
  5. HONDABIKEPRO Bash Plate
    By Beemerphile in forum NC700 Mods
    Replies: 5
    Last Post: 17th March 2013, 08:07

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •