You could ride it home
Type: Posts; User: rjarrell
You could ride it home
Selling my 2014 nc700x due to health reasons. Located in St Petersburg, Fl. Adult riden, has 5700 miles. comes with Factory extended windshield, Shad Bags, center stand, mustang front seat,...
Ride review of Nova Scotia
An invitation to my co-worker’s son’s wedding in Digby, Nova Scotia was all I needed to put into motion a motorcycle trip to explore Nova Scotia and New Foundland. The...
Just adjusted the chain on my 2014 and checked it with a motion pro rod and noticed after aligning the rear sprocket, chain and front sprocket the marks on each side of the swing are not in the...
Thank You., exactly what I am looking for.Raised the forks 1/2 inch. Waiting for the links
I have some that lowered my bike to between 1" and 1.25", but not sure exactly since I haven't measured...
Found some -20 millimeter lowering links from Perfection in UK. I'm estimating this will lower bike about 3/4 in. Looking for a little more stability when coming to a stop. Has anyone tried this size...
Has anyone modified the seat and trunk latches so they do not lock. The bike is so rare that I don't think anyone would know to look in those areas and the threat of malfunction would be eliminated....
Another area to look at is chain oil on the rear brake disk.
What kind of seat is that
Has anyone noticed any difference with the weights out of the handlebars( such as more vibration)
I also checked the dealer parts catalogue and didn't see one available for the NC. I noticed after making the adjustment that the slot in my adjuster was up. This could lead to water in the cable...
Was just adjusting my clutch and noticed there was no rubber boot covering the adjusting mechanism.
Is mine missing or is this normal and the factory decided this model doesn't need one.
Wy wife wants to ride on back and she is heavy. I'm going to need more power. Anyone know how large the NC 700 motor can be bored out to.
Harley Davidsons suffer from a lot of rear wheel bearing failures. Belts require tension to work properly. Wondering if the NC 700 counter sprocket, swing arm and rear wheel bearings are designed for...
I like to put the washers in the oven at 450 degrees, bake for 4 hours.
Can you re-use a crush washer if you heat it to red heat and let it cool to room temp? Does that "re-inflate" it for want...
Were any valves out of adjustments
I'm with you on this. I have as much fun tinkering on my bikes as riding them. Used to own BMW airheads and part of the camaraderie
was getting together to fix and maintain our bikes.
theny probably have a patent
looks like mud running to me !
Sorry you are having these problems. Did you come up with the a Fix! I'm sure this will probably happen to others.
This is when you wish thad been done by the dealer
It's a torture rack
Anyone have a rear hugger for sale. I have a 2014 model
Hello from the future, This is Fake News !
Looking for a front fender extender for my 2014 nc700x