- Joined
- Feb 7, 2014
- Messages
- 1,510
- Reaction score
- 47
- Points
- 48
- Location
- Mighty Peculiar, BRRRRRRRRRRRRmont.
What is the diameter of the pins? I can't look at my bike as it is still in winter storage.
What Size Are The Body Panel Pins?
- Thread starter kpinvt
- Start date
I measured a spare clip that I have, and it is about 0.23 inches in diameter. Maybe they are for a 6mm hole?
Last edited:
HarveyM
Active Member
The plastic panel nylon rivets?
Honda uses two kinds a 5.5 mm wide with a 14mm long pin. They have a ‘bar’ style press in button. The other is a 5.9 mm wide with 10 mm shaft one with a round press in button that has a philips screw indent.
I bought some of these guys as replacements
Bolt M6 Three Stage Push Rivets | Parts & Accessories | Rocky Mountain ATV/MC
based on a comment by beemerphile here:
Those little plastic button fasteners ...
Honda uses two kinds a 5.5 mm wide with a 14mm long pin. They have a ‘bar’ style press in button. The other is a 5.9 mm wide with 10 mm shaft one with a round press in button that has a philips screw indent.
I bought some of these guys as replacements
Bolt M6 Three Stage Push Rivets | Parts & Accessories | Rocky Mountain ATV/MC
based on a comment by beemerphile here:
Those little plastic button fasteners ...
Last edited:
