On the cheap wider footpegs

[Fred Harper]

I sure hope these pictures come out. I made these out of a piece of truck tire tread, they are about 1/2" wider than stock and seem to give better support. Used an angle grinder to cut the tread(steel belted). If this works I'll be happy to fill in any missing info from the pictures.

 

[Klap]

VERY well done! Another excellent "poverty rider" idea!

 

[Rapturee]

Outstanding job Fred!! :{)

 

[Fred Harper]

When I do another I'll run a bolt down like the original. It's hard to keep the screw tight on the left side as I use it to dismount(sometimes).