Turn signal switch wire

[davidc83]

Hey guys, on the Honda NC700x, in the left turn signal/horn assembly, there are 2 black wires which goes into the housing. The smaller (outer) of the 2 wires has a connector at the entrance to the housing; does anyone know what this wire is for? I thought it would be for the horn, turn signals or flasher, but disconnecting it and all the items in the housing still work....

 

[dduelin]

Clutch switch interlock?

 

[DirtFlier]

On Honda motorcycles, black is always a power wire. If you look on the schematic in the S/M, you can figure it out.

 

[dduelin]

The service manual shows the black wires are for the clutch interlock switch. The switch allows the bike to start in gear with the clutch pulled in.

 

[davidc83]

thanks guys