Page 1 of 10 123 ... LastLast
Results 1 to 10 of 94

Thread: nut plates for winshields

  1. #1

    Supporting Vendor

    nut plates for winshields
    nut plates for winshields
    nut plates for winshields
    HONDABIKEPRO's Avatar
    Bike: NC700X nc700xd
    Join Date
    Nov 2012
    Location
    WASHINGTON ST lakewood
    Posts
    585

    nut plates for winshields

    new nut plates for windshield to replace the rubber well nuts that honda uses,, i now have two one is 5mm the other is 6mm, the 6mm will work with honda touring shields or any that may use a 6 bolt,, if you have a honda touring shield you can raise it to the top holes to gain about a inch, you will need longer bolts,, you can also put in a spacer to move the windshield forward, or change the angle, by putting spacers under the shield or mount, to clear hand guards.
    5mm or 6mm plates 25.00 plus shipping dale





    Last edited by HONDABIKEPRO; 30th April 2013 at 18:33.

  2. #2
    Senior Member Bug Dr.'s Avatar
    Bike: 17 Tenere ES-16 R1200RS
    Join Date
    Sep 2012
    Location
    Southern Ozarks
    Posts
    731
    Nice Dale! I might get some to raise my tall Honda screen up a bit. I need more seat time to tell for sure though.
    Mike

  3. #3
    Senior Member nut plates for winshields duk2n's Avatar
    Bike: NC700X ABS
    Join Date
    Jul 2012
    Location
    Spain
    Posts
    1,024
    Dale, I think you could sell some of these to us European guys if you tell us how much would be the shipping cost.

    More over, if you're interested I can forward you ad to the spanish forum
    -JL-

    Maņo a mucha honra

  4. #4
    Senior Member
    Bike: 2012 NC700X, 2002 Vstar1100
    Join Date
    Jan 2013
    Location
    Oakwood Tx
    Posts
    367
    I used the original bolts and plates to move my honda touring shield up to the top holes... There were no issues with it.

  5. #5
    Super Moderator
    Bike: NC700x, ST1300, XR250L, CX500 Turbo, TRX350fwd, CT90, C70, TRX250, TRX 500, VFR1200x
    Join Date
    Dec 2012
    Location
    Wausau WI
    Posts
    1,841
    Quote Originally Posted by DanWill View Post
    I used the original bolts and plates to move my honda touring shield up to the top holes... There were no issues with it.
    Same here...........but the plate area around the top "nut" needed to ground away a small amount for clearance.

  6. #6
    Senior Member
    Bike: 2012 NC700X, 2002 Vstar1100
    Join Date
    Jan 2013
    Location
    Oakwood Tx
    Posts
    367
    Quote Originally Posted by showkey View Post
    Same here...........but the plate area around the top "nut" needed to ground away a small amount for clearance.
    Interesting, I didn't have to grind any to get mine to work, they fit fine. Odd.

  7. #7

    Supporting Vendor

    nut plates for winshields
    nut plates for winshields
    nut plates for winshields
    HONDABIKEPRO's Avatar
    Bike: NC700X nc700xd
    Join Date
    Nov 2012
    Location
    WASHINGTON ST lakewood
    Posts
    585
    Quote Originally Posted by showkey View Post
    Same here...........but the plate area around the top "nut" needed to ground away a small amount for clearance.
    some will fit,without , some will not, these will fit, i think it is the aluminum casting dale

  8. #8

    Supporting Vendor

    nut plates for winshields
    nut plates for winshields
    nut plates for winshields
    HONDABIKEPRO's Avatar
    Bike: NC700X nc700xd
    Join Date
    Nov 2012
    Location
    WASHINGTON ST lakewood
    Posts
    585
    if anyone needs 5 or 6mm nut plates i have about 20 of each, and one aluminum skid plate for nc700x dale

  9. #9
    Senior Member
    Bike: 2012NCX
    Join Date
    Dec 2012
    Location
    Rockville, MD
    Posts
    122
    Dale, what's price and color of the skid plate?
    Thanks.
    Paul

  10. #10
    Senior Member nut plates for winshields
    Bike: 2011 Victory XR / 2012 NC700X DCT (#79)
    Join Date
    Feb 2013
    Location
    Orlando, FL
    Posts
    254
    Which is the original bolt size, 5 or 6mm? Guess I'm a little confused why you have to offer two sizes.
    2012 NC700X DCT ABS - Mods: Cee Bailey's 20" Windshield, Honda Center Stand, Givi Engine Guards, Lighter Socket in Frunk, Givi E55 Tech Trunk, Givi Trekker Outback Saddlebags, Shad Comfort Seat, CycleGear Hand Guards, Add-On Footpegs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •