NC are not particularly buzzy.
One test get mountain bike gel glove and see you get any relief
Prior discussion on the topic focusing on wrist angle and throttle pressure cramping.
What,s Your Opinion ?
Thanks for posting and for the links I'd recently read the first one but hadn't read the second (or it was years ago lol) something along the lines of the second article did encourage me to install a set of risers which have helped but I'm just thinking of ironing out the little remaining creases of discomfort, most of my rides are an hour to an hour and a half and there are times the last 20 min or so my hands are bothering me enough to get my attention
Originally Posted by showkey
My gauntlets are cortech (not sure what model) but I've never had any discomfort while wearing them
Originally Posted by SilverRocket
My summer gloves though are a thin pair of Tourmaster gloves that have sense been discontinuedhttps://uploads.tapatalk-cdn.com/201...07efe95993.jpghttps://uploads.tapatalk-cdn.com/201...8386fccfdc.jpg
I went down in April while wearing my summer gloves and they held up well, especially for 6 year old gloves with at least 60,000 miles on them
I've been looking into what gloves to get next, so far I'm thinking thesehttps://uploads.tapatalk-cdn.com/201...ccf073126c.jpghttps://uploads.tapatalk-cdn.com/201...22ef28261f.jpg
I think the problem may be with your hands and not the bike. I just had carpal tunnel surgery two days ago and never had an issue when I rode my bike.
I'm hoping that's not the case but I know it's a possibility
Originally Posted by Ruggybuggy
Now that I've got my NC up and running again (and I'm able to ride) I went on a longer trip and my pointer finger middle finger and thumb were going numb and hurting from the vibration, but only on my right hand, when I stopped for gas I installed this
Triclicks Black Throttle Control Motorcycle Cruise Control Assist Rocker Cramp Stopper https://www.amazon.com/dp/B071JLQZ6K..._dBTzDb5MQVTPK
It's been in my frunk for awhile but I've only used it a few times, it fixed my vibration problem pretty well but it was kind of irritating because I'm not used to it I guess, I came up on stopped traffic due to an accident and I wanted to filter through the traffic, I moved the cramp assist to the side and it was resting on the bar end weight and the throttle and I had almost no vibration, so my vibration problem was from the throttle tube having enough room to vibrate and irritate me.
I'm going to install the o-ring between the bar end weight and throttle again and problem solved [emoji16]
O-Ring Throttle Lock
By the way the best deal I found was harbor freight has an o-ring assortment for under $10 I get 10 the size I want for my NC throttle and 387 other o-rings [emoji1360]https://uploads.tapatalk-cdn.com/201...e8a0d7cf16.jpg